How to Install Zimbra 8.6 on Ubuntu 14.04 Server
https://www.howtoforge.com/tutorial/ubuntu-14-04-zimbra-server/
My zimbra Server profile used in this tutorial:
Domain : sendaljepit.local
IP : 192.168.1.101
Mail : mail.sendaljepit.local
What we will do in this tutorial:
My zimbra Server profile used in this tutorial:
Domain : sendaljepit.local
IP : 192.168.1.101
Mail : mail.sendaljepit.local
What we will do in this tutorial:
Installation of prerequisites
Step 1 - connect to your server, get root privileges and install this package.
apt-get install libgmp10 libperl5.18 unzip pax sysstat sqlite3 dnsmasq wget
Configure hostname and DNS Server
In this tutorial will use the 'dnsmasq' resolving nameserver to speedup DNS lookups in Zimbra. Dnsmask has been installed as prerequisite in the first chapter, so we just have to configure it now:
Step 1 - Edit hostname and hosts
vim /etc/hostname
change your hostname with this 'mail.sendaljepit.local'.
vim /etc/hosts
add this line:
192.168.1.101 mail.sendaljepit.local mail
Step 2 - Edit dnsmasq configuration
vim /etc/dnsmasq.conf
server=192.168.1.101 domain=sendaljepit.local mx-host=sendaljepit.local, mail.sendaljepit.local, 5 mx-host=mail.sendaljepit.local, mail.sendaljepit.local, 5 listen-address=127.0.0.1
Step 3 - Reboot
sudo reboot
Installing Zimbra
Step 1 - Download Zimbra and extract it
wget https://files.zimbra.com/downloads/8.6.0_GA/zcs-8.6.0_GA_1153.UBUNTU14_64.20141215151116.tgz
tar -xvf zcs-8.6.0_GA_1153.UBUNTU14_64.20141215151116.tgz
cd zcs*
tar -xvf zcs-8.6.0_GA_1153.UBUNTU14_64.20141215151116.tgz
cd zcs*
Step 2 - Run the Installer
./install.sh
At this step, zimbra will check the required packages and will ask you to agree to their installation.
and then choose the zimbra package :
here doesn`t need zimbra-dnscache, because in this tutorial use dnsmasq.
You need to wait, because this installation takes some time.
next step is configure "zimbra-store" for getting admin password. See the picture:
Choose number "4" and enter. and then type your password:
Apply all Configuration:
Testing Zimbra
to test your zimbra server is running, you can type a command :
su - zimbra
zmcontrol status
zmcontrol status
try to access zimbra from web browser. https://192.168.1.101/
or try admin page " https://192.168.1.101:7071/ ".
Conclusion
Zimbra is an Open Source mail server application which provides many features and is easy to use for admin and client. Zimbra requires a lot of server ressources, so dont use it on servers that do not match the base requirements outlines in the first chapter.
Comments
Post a Comment