initrd - scheme for loading a temporary root file system into memory(part of Linux startup)

By OK -
The initial RAM disk (initrd) is an initial root file system that is mounted prior to when the real root file system is available. The initrd is bound to the kernel and loaded as part of the kernel boot procedure. The kernel then mounts this initrd as part of the two-stage boot process to load the modules to make the real file systems available and get at the real root file system.



In computing, initrd (initial ramdisk) is a scheme for loading a temporary root file system into memory, which may be used as part of the Linux startup process. initrd and initramfs refer to two different methods of achieving this. Both are commonly used to make preparations before the real root file system can be mounted.

Anatomy of the initrd

The initrd image contains the necessary executables and system files to support the second-stage boot of a Linux system.
Depending on which version of Linux you're running, the method for creating the initial RAM disk can vary. Prior to Fedora Core 3, the initrd is constructed using the loop device. The loop device is a device driver that allows you to mount a file as a block device and then interpret the file system it represents. The loop device may not be present in your kernel, but you can enable it through the kernel's configuration tool (make menuconfig) by selecting Device Drivers > Block Devices > Loopback Device Support. You can inspect the loop device as follows (your initrd file name will vary):
Listing 1. Inspecting the initrd (prior to FC3)
1
2
3
4
5
6
# mkdir temp ; cd temp
# cp /boot/initrd.img.gz .
# gunzip initrd.img.gz
# mount -t ext -o loop initrd.img /mnt/initrd
# ls -la /mnt/initrd
#
You can now inspect the /mnt/initrd subdirectory for the contents of the initrd. Note that even if your initrd image file does not end with the .gz suffix, it's a compressed file, and you can add the .gz suffix to gunzip it.
Beginning with Fedora Core 3, the default initrd image is a compressed cpio archive file. Instead of mounting the file as a compressed image using the loop device, you can use a cpio archive. To inspect the contents of a cpio archive, use the following commands:
Listing 2. Inspecting the initrd (FC3 and later)
1
2
3
4
5
# mkdir temp ; cd temp
# cp /boot/initrd-2.6.14.2.img initrd-2.6.14.2.img.gz
# gunzip initrd-2.6.14.2.img.gz
# cpio -i --make-directories < initrd-2.6.14.2.img
#
The result is a small root file system, as shown in Listing 3. The small, but necessary, set of applications are present in the ./bin directory, including nash (not a shell, a script interpreter), insmod for loading kernel modules, and lvm (logical volume manager tools).

Comments

Post a Comment

Popular posts from this blog

HAproxy logging

By OK -
ubuntu@ubuntu:/etc/haproxy$ cat /etc/rsyslog.d/haproxy.conf # Create an additional socket in haproxy's chroot in order to allow logging via # /dev/log to chroot'ed HAProxy processes $ModLoad imudp $UDPServerRun 514 local0.* -/var/log/haproxy-0.log local1.* -/var/log/haproxy-1.log ### keep logs in localhost ## $AddUnixListenSocket /var/lib/haproxy/dev/log ------------------- ubuntu@ubuntu:/etc/haproxy$ cat /etc/haproxy/haproxy.cfg global chroot /var/lib/haproxy user haproxy group haproxy log 127.0.0.1   local0         log 127.0.0.1   local1 notice daemon frontend www     bind 192.168.40.128:8282    # haproxy public IP     default_backend as-backend    # backend used backend as-backend    balance leastconn    mode http  server as1 192.168.40.128:8082 check    # application srv 1 defaults log ...
Read more

teamcity Automatic Agent Start under Linux

By OK -
Automatic Agent Start under Linux To run agent automatically on the machine boot under Linux, configure daemon process with the  agent.sh start  command to start it and  agent.sh stop  command to stop it. Refer to an example procedure below: 1. Navigate to the services start/stop services scripts directory: cd /etc/init.d/ 2. Open the build agent service script: sudo vim buildAgent 3. Paste the following into the file : #!/bin/sh ### BEGIN INIT INFO # Provides: TeamCity Build Agent # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start build agent daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO #Provide the correct user name: USER="agentuser" case "$1" in start) su - $USER -c "cd BuildAgent/bin ; ./agent.sh start" ;; stop) su - $USER -c "cd BuildAgent/bin ; ./agent....
Read more

NFS mount add in fstab _netdev instead of default | firewall-cmd --list-all

By OK -
Redhat recommends us to add  _netdev  option for NFS file system in /etc/fstab. So that they can be mounted after starting the networking service. Alternative ways to refer to partitions: Label : LABEL=label Network ID Samba : //server/share NFS : server:/share SSHFS : sshfs#user@server:/share Device : /dev/sdxy (not recommended) Example #1 //192.168.1.134/share_name /mnt/share_name cifs username=server_user,password=server_password,_netdev 0 0 ^ Path to your share ^ Mountpoint ^ Username ^ Password ^ See note A Note A: The  _netdev  options makes sure the mount is only attempted AFTER a network connection has been established. Example #2 10.10.10.1:/vol1/fs1 /data nfs defaults,_netdev 0 0 ============================ [root@localhost ~]# firewall-cmd --list-all public   target: default   icmp-block-inversion: no   interfaces:   sources:   services: dhcpv6-client high-availabi...
Read more